Rob

Rocking a JUUL? Having issues? You’re not alone! In this article, we’re detailing ALL of the most common JUUL problems

JUUL is stealing ALL the headlines right now, and usually for all the wrong reasons.

This super-simple vape device is now INSANELY popular and has propelled JUUL Labs to unprecedented heights in the vape space.

The profits are rolling in, alongside a fair few lawsuits, and JUUL is now in the process of expanding its reach outside of America and into the UK and Europe.

But JUUL isn’t without its problems. During the past 12 months or so, there have been plenty of issues reported with the device.

The most significant JUUL problems are detailed below.

I’ve also included fixes where available.

I’ll be updating this article as we find and discover more JUUL problems, but for now, these are the most common JUUL issues affecting users.

JUUL Problems – All The Ones To Watch Out For…

1) JUUL Battery Life – Yep, It REALLY Does Suck

This problem is a BIG one, and it is 100% unsolvable, as it is a problem with the design of JUUL – and it’s not something you can change.

The JUUL is a tiny device, that’s kind of its USP. But this creates problems when it comes to battery life.

The JUUL Wall Charger. A Place It Spends A LOT of Time

Small batteries mean small battery life, and the JUUL is no exception to this universal rule.

With heavy usage, you’re looking at a few hours max.

With moderate to little usage, you could probably stretch it out over a full day, but that is very rare in my experience.

Finger’s crossed JUUL will sort this out when it releases the JUUL 2.

Simple Solution For Now: If you’re really struggling with JUUL battery life, and you want to keep using JUUL, you might want to pick up a spare JUUL battery (via JUUL) and then get yourself a portable JUUL charger like the Jili Box Charger For Juul Vape ($39.99). 

2) JUUL Pods Taste Burnt?

A LOT of JUUL users report that they get a burnt taste when vaping on a new (or old) JUUL pod.

There could be a couple of reasons for this: 1) you’re pulling too hard and taxing the coil too heavily; or 2) your JUUL is dirty and needs cleaning, as gunk can muck up the connection (literally).

Save 15% On ALL JUUL Pod Orders W/ JUUL “Auto-Ship” Program

Simple Solution: In order to clean your JUUL, simply remove the pod and take a Q-Tip and clean the inside until its all shiny and clean.

This should solve the issue if the culprit was dirty connectors. However, if it still persists, and you’ve tried drawing on it more lightly, you might have a faulty device which is all too common.

If this is the case, use your warranty and get JUUL to send you another one.

3) Too Easy To Lose

This is a problem I didn’t envisage having but is something that KEEPS on happening!

Because of its diminutive size, I end up losing my JUUL about three times a week.

Sometimes it’s in the car, other times down the side of the sofa. Either way, it usually takes me a couple of hours to locate it.

This isn’t JUUL’s fault, really. I just need to keep things more organized.

The JUUL 2 will apparently feature Bluetooth and connect to your smartphone. If this happens, there is the possibility of a “Find My JUUL” type feature similar to what you have on Android and iPhone.

4) JUUL Pods Don’t Fit Properly

My JUUL – Click Here For Latest Deals

If you’ve found that JUUL pods just don’t fit that well in your JUUL vape, you’re not alone! Tons of people have experienced this – and it’s likely down to wonky quality control on JUUL’s part.

Simple Solution: Fortunately, there is a fix at hand, and it comes via DisgruntledGoatBoy on Reddit.

I have 2 Juuls. One of them is great, always hits well, pods fit firmly, etc. The other, however, was always a pain in the ass, and I really only used it if my other Juul was charging. Pods were always kinda “loose” in it, forcing me to have to always fiddle with it to get it to hit, remove/reinsert pod, etc. Plus it would frequently have issues charging because the pod wouldn’t be detected. On top of all that, it just didn’t hit as well as my other Juul…vapor would be thinner and less satisfying.

So, a few weeks ago a read a thread about someone else having similar issues, and someone recommended for that person to put his fingers over the transparent hexagon part of the pod, so I tried that….and it worked…kinda. The airflow was definitely tighter than I would like, but it was hitting more consistently at least…then I had an idea…

If the issues was airflow, I thought I’d try a more permanent fix; so I grabbed my trusty leatherman tool (any pair of needle-nose pliers will do). I removed the pod and use the pliers to “pinch” in the hollow end of the Juul where the pod goes. Not very much at all, just a small amount of pressure should do it — obviously you don’t want to pinch it in so much that you can’t get the pod back in.

After doing that the pods fit in much tighter and my Juul hits great every time, just like the other one…no longer a need to cover the pod with my fingers. Difference is night and day and it only took 3-seconds to fix.

5) JUUL Not Hitting Properly (Lacks Power)

If your JUUL isn’t hitting properly it is likely down to poor connectivity between the JUUL pod and the battery.

This can be fixed, using the above-mentioned method, as it basically ensures a more secure and solid connection between the JUUL pod and the battery.

Simple Solution: Another method, which is a lot simpler, goes something like this: take out the JUUL pod, squeeze it, and then, if you can see bubbles, flick it until they’re all gone. That should increase the potency of the draw.

I’ve included a video explanation via Stoners Cabin below in case any of you are visual learners!

UP NEXT: Not Interested In JUUL? Check Out VapeBeat’s Guide To 2018’s Best Pod Mod Vapes

If you’re after an EASY to wick RTA, you’re in the right place: I have a few really solid options for you!

RTA tanks are great – if you’re an experienced vaper, meaning you know your way around a deck and understand correct wicking.

For newer users, however, an RTA can present quite a few problems. And this is NOT something you want when investing in a new tank.

The trickiest thing about RTA, by far, is wicking them – get it right and you’re golden, mess it up and you’re screwed.

But if you’re after an easy to wick RTA that is super-simple to set up, doesn’t leak, AND vapes like an industrial power station…

Well, you’ll definitely want to check these vape tanks out!

Easy To Wick RTA Tanks: My #1 Picks For New Users 2018

Each and every one of them is easy to wick, simple to use, and produces excellent, precise flavor.

1) Augvape Intake RTA

Not only is the Intake RTA easy to wick, simply cut the cotton and rest them over the juice ports, it is also 100% LEAK-PROOF.

This is achieved on account of the airflow, which is situated at the top of the tank, as opposed to the bottom.

Top Mounted Airflow Means ZERO Leaks. Plus, It’s Insanely Simple To Wick (Remember: Less Is More With This One)

The flavor on the Intake RTA is very impressive too. Ditto its cloud production.

I’m a HUGE fan of Augvape, and this tank is definitely one of the easiest to live within the RTA space right now.

In fact, it’s so simple, it often feels more like a sub ohm vape tank!

2) GeekVape Zeus RTA

The Zeus RTA, like the Intake RTA, is, again, another RTA that claims to be 100% leak-proof.

In my experience, these claims are true as well.

A Dual-Coil MONSTER Ideal For Cloud & Flavor Chasers

But what I like most about this vape tank is just how forgiving it is with wicking; you just wick it and quit it.

This HUGE margin of error means this dual-coil RTA is ideal for newbies that are chasing BIG flavor and BIG clouds (just without the ball ache of finicky wicking).

3) Kayfun 5

This is an MTL vape tank, so it might not be too everybody’s tastes but it is included here because of how simple it is to wick.

The deck is TINY, so you’ll need to make your own coils. But once you have set up and wicking is a breeze.

The Ferrari of Flavor. The Best MTL Vape Tank In The Business. Bar NONE!

And once you’re set up, you’ll encounter some of the best overall flavor in the business. In this regard, Kayfun is regarded as The King.

There are some things to keep in mind when using a Kayfun, however:

• You’ll need to use higher-PG E Juice (it’s MTL, so you want that throat-hit)
• Normally, you’ll run it below 20W – and this means MASSIVE savings on battery drain and E Juice consumption.
• And because it’s MTL, you can run Nic Salts E Juice through it too
• It’s PRICEY. But I think it’s 100% worth it – just for the flavor alone
• VaporFi carries the Kayfun V5 for $119.95. 

Why Are Some RTAs Tricky To Wick?

There are a million reasons for why some RTAs are trickier to wick than others. But mostly it is down to the design of the tank and its deck.

Airflow on rebuildable tanks is key, as are pressures within the tank once it’s sealed.

A lot of advanced RTA tanks require advanced building skills, a keen eye for wicking, and an appreciation of how the deck and its airflow system works.

If you’re a skilled builder, you’ll be fine with almost any RTA tank.

The RTA tanks inside our Best RTA Tanks Guide are all simple to work and live with – and, yes, that includes wicking and building.

However, new users are best off sticking with the above-mentioned RTAs, as these are all, essentially, idiot-proof when it comes to wicking and building.

RDA tanks, generally speaking, are A LOT easier to live and work with.

And if you use a squonk mod, you’ll never have to drip again.

Check out VapeBeat’s top picks for the best RSA Tanks right now (RSA: Rebuildable Squonk Atomizer).