Lost Vape Orion Bar Problems & How To Fix Them

Lost Vape Orion Bar Problems & How To Fix ThemPin
Trending Vape Products…

Product Type

Buying Guides

Editor’s Choice







The Lost Vape Orion Bar is a fan-favorite for a reason—its sleek design, powerful performance, adjustable airflow, and user-friendly features make it a go-to for vapers everywhere.

But even this solid device isn’t immune to the occasional hiccup.

From blinking lights to weak vapor production and connectivity issues, problems can pop up and kill the vibe. The good news? Most of these issues are easy to troubleshoot and fix, so you can get back to smooth, uninterrupted vaping.

In this guide, we’ll break down the most common Orion Bar problems and how to solve them like a pro.

COMMON ORION BAR VAPE PROBLEMS & HOW TO FIX THEM 🔧💨

Before jumping into solutions, it’s crucial to understand what might be causing your Lost Vape Orion Bar to act up. Let’s break down the most common issues and what could be behind them.

Power & Connectivity Issues

If your Orion Bar won’t turn on or is having power issues, the battery is the first place to check. Over time, the battery can lose its charge or malfunction due to:

  • Manufacturing defects
  • Normal wear and tear
  • Long periods of disuse

🔋 Quick Fix:

  • Make sure the device is fully charged.
  • Inspect the battery contacts for dust or vape juice buildup and clean them gently.
  • Check for any loose or improperly assembled parts.

Poor connections between the battery and other components can also cause disruptions. Dust, debris, or residual vape juice on the metal contacts can block proper connectivity, leading to a non-responsive device.


💨 Vapor Production Problems

No vapor or weak hits? That usually points to issues with the pod or coil.

Common Causes:

  • The pod isn’t filled properly with vape juice.
  • The coil is burnt out—especially if you’re a chain vaper or use extra sweet e-liquids.
  • The adjustable airflow is too restricted, choking vapor production.

🔥 Quick Fix:

  • Refill your pod with e-liquid.
  • Swap out the burnt coil for a fresh one.
  • Adjust the airflow to allow for smoother draws.

A burnt coil will kill your flavor and cloud production, leaving you with dry hits and a nasty taste. And sweet juices? They’re coil killers—so clean or change coils regularly!


🖥️ Software Glitches & Resetting

Though rare, the Orion Bar’s firmware can glitch, causing:

  • Inconsistent performance
  • Misfiring
  • Complete power failure

💡 Quick Fix:

  • If your device is rechargeable, try a soft reset or firmware update (if available).
  • For disposables, glitches usually can’t be fixed, but letting the device rest might help.

🚨 Blinking Light Warnings

A blinking LED light isn’t just for show—it’s your device’s way of calling for help.

What It Could Mean:

  • Low battery → Time to recharge!
  • Low vape juice → Refill the pod.
  • Short circuit → Check for internal damage or liquid leaks.
  • Overheating → Let the device cool down.
  • Water exposure → If your vape got wet, it might be damaged.

💡 Pro Tip: Pay attention to the color and pattern of the blinking light. It usually points to the exact issue.


🔥 Overheating Issues

Taking back-to-back hits without breaks? Your Orion Bar might be getting too hot.

Why It Overheats:

  • The coil generates heat that builds up if you chain vape.
  • Blocked airflow prevents heat from escaping, making the battery and tank heat up.

🌬️ Quick Fix:

  • Take breaks between puffs to let the device cool.
  • Check and adjust the airflow holes—there are three, and they should stay open for proper ventilation.

Ignoring overheating can shorten your device’s lifespan and even pose safety risks, so don’t push it too hard.


How to Fix Your Lost Vape Orion Bar?

Let’s Get Your Orion Bar FIXED...Pin

Most problems are easy to fix with a little know-how. Whether it’s a blinking light, weak vapor, or connectivity problems, here are step-by-step solutions to get your vape back in action.

🔋 1. Recharge the Battery

If your device isn’t powering on or seems sluggish, the battery might just need a charge.

What to Do:

  • Connect your Orion Bar to a compatible power source using a USB-C cable.
  • Let it charge for 1–2 hours.
  • Check for the LED light indicator to confirm it’s charging.

Pro Tip: Always use the original or a high-quality charging cable to avoid damaging the battery.


🧼 2. Clean the Vape (Fix Connectivity Issues)

Dust, e-liquid, or debris can block the connection between the pod and battery, causing power and firing issues.

How to Clean It:

  1. Turn off your Orion Bar.
  2. Remove the pod from the device.
  3. Use a dry cotton swab to gently clean the connection points.
  4. Reinsert the pod until you hear a click.

Pro Tip: Clean your device regularly to avoid buildup that can mess with connectivity.


🥤 3. Check Your Vape Juice Level

Low or empty e-liquid levels can lead to weak vapor, dry hits, or blinking lights.

Quick Fix:

  • Inspect the pod for vape juice.
  • Refill or replace the pod if it’s low.

Pro Tip: Always keep your pod at least half full to avoid burning out the coil.


4. Inspect for Short Circuits

Short circuits can stop your device from working altogether.

What to Look For:

  • Moisture or liquid leaks near the battery or pod.
  • A blinking LED that won’t stop.

What to Do:

  • Dry off any moisture immediately.
  • If the problem persists, contact Lost Vape support for help.

🌡️ 5. Let Your Device Cool Down

Overheating can cause misfiring and performance issues.

How to Fix It:

  • Stop using the vape and let it cool down completely.
  • Avoid chain vaping or taking long, back-to-back hits.
  • Make sure the airflow holes aren’t blocked.

Pro Tip: Use your vape in moderation to prevent heat buildup and extend its life.


🔌 6. Double-Check All Connections

Loose or poorly connected parts can mess with your vape’s performance.

What to Do:

  • If possible, disassemble the device to check internal connections.
  • Ensure the battery and pod are secure.
  • Press the pod in firmly until you hear a click.

🌬️ 7. Adjust the Airflow Control

Poor airflow can kill vapor production and flavor.

Quick Fix:

  • Locate the airflow ring at the base of the pod.
  • Turn it clockwise to tighten airflow or counterclockwise to loosen it.
  • Experiment until you find the perfect draw.

Pro Tip: A slightly more open airflow usually delivers smoother hits.


Loose pods or burnt coils can cause your device to misfire or stop working.

What to Check:

  • Ensure the pod is securely connected—listen for a click when inserting.
  • If the coil is burnt (muted flavor, burnt taste), replace the pod.

Reminder: Orion Bar pods are disposable—once the coil wears out, swap in a new pod.


📖 9. Follow the Manufacturer’s Guide

Tried everything and still stuck? It’s time to check the user manual.

What to Do:

If all else fails, contact Lost Vape support or a professional repair service for help.

Review the manufacturer’s troubleshooting guide.


If you cannot get it fixed and you’ve tried everything, my advice is simple: ditch the disposables and get yourself a pod vape instead. I recommend this one right now – it’s the only thing I’ve used for the past six months.

The Orion Bar is properly problematic, there’s loads of complaints about it online. If you have a dud unit (and there appear to be plenty of these doing the rounds), it might be time to accept defeat and move on.


Need Help? No Problem.

We’ve helped millions of people get started with vaping. If you have any questions or just want plenty of actionable advice, hit the button below – it’s a direct line to Drake.

Leave a Reply

Your email address will not be published. Required fields are marked *